Banner R55F Fiber Optic Series - Manual (Page 12)

R55F Series Glass and Plastic Fiber-Optic Color Mark Sensors
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or
replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty
period. This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any
other warranty either expressed or implied.
WARNING . . .
Not To Be Used for Personnel Protection
Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.
These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety
applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current
Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection.
!
Euro-Style Field-Wireable Connectors
Contacts: Gold-plated; 4-pin models rated 250V ac/dc max., 4 A max.; 5-pin models rated 50V ac/dc max., 4A max.
Cable Diameter: 4.0 to 5.0 mm (0.16 to 0.20")
Temperature: -25° to +90°C (-13° to +194°F)
Environmental Rating: NEMA 6P, IP 67
M12 x 1
10 mm
(0.4")
60 mm
(2.4")
15.0 mm
(0.59")
Style
20 mm
(0.8")
5-Pin
Right-angle
20 mm
(0.8")
FIC-M12M5A
5-Pin
Straight
FIC-M12M5 Male
Male
41 mm
(1.6")
30.5 mm
(1.20")
M12 x 1
15.0 mm
(0.59")
FIC-M12F5A Female
20 mm
(0.8")
M12 x 1
10 mm
(0.4")
15.0 mm
(0.59")
60 mm
(2.4")
FIC-M12F5 Female
Model Gender
20 mm
(0.8")
Dimensions Pin-out
Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: [email protected]