Banner WORLD-BEAM QS30 High-Power Opposed Mode - Manual (Page 5)

Brackets
SMBQS30L • 14-gauge, stainless steel right-angle bracket
for cable models
• Clearance for M4 (#8) hardware
• ± 12° tilt adjustment
SMBQS30LT • 14-gauge stainless steel for QD models
with right-angle cables
• Tall right-angle mounting bracket
• ± 8° Tilt adjustment
64.4mm
[2.54"]
1.9mm
[0.07"]
4.5mm
[0.18"]
24.0mm
[0.95"]
11.0mm
[0.43"]
ø4.3mm
[ø0.17"]
44.0mm
[1.73"]
22.0mm
[0.87"]
24°
R35.0mm
[R1.38"]
59.4mm
[2.4"]
R33.0mm
[R1.3"]
20°
33.0mm
[1.3"]
4.5mm
[0.18"]
24.0mm
[0.95"]
11.0mm
[0.43"]
ø4.3mm
[ø0.17"]
44.0mm
[1.73"]
R35.0mm
[R1.38"]
1.9mm
[0.07"]
22.0mm
[0.87"]
16°
R1.7mm
[R0.07"]
R33.0mm
[R1.3"]
91.4mm
[3.60"]
86.4mm
[3.4"]
20°
SMBQS30Y • Heavy-duty die-cast bracket
• M18 vertical mounting option
• ± 8° tilt adjustment with cabled units
• Nuts and lockwasher included SMB30SC • 130 mm swivel bracket, barrel mount
• Black reinforced thermoplastic polyester
• Includes stainless steel mounting and
swivel locking hardware
16.35 mm
(0.64")
24.0 mm
(0.94")
35.0 mm
(1.38")
13.3 mm
(0.52")
26.5 mm
(1.04")
18.0 mm
(0.71")
56 mm
(2.20")
7.0 mm
(0.28")
33 mm
(1.30")
17.0 mm
(0.67")
M18 X 1
4 X Ø 3.3 mm
(0.13")
2 X R 33.0 mm
(1.30")
50.8 mm
(2.00")
58.7 mm
(2.31")
66.5 mm
(2.62")
30.0 mm
(1.18")
29.0 mm
(1.14")
12.7 mm
(0.50")
M30 x 1.5
internal
thread
Other Compatible Mounting Brackets (see Banner Photoelectric catalog or website for more information):
• SMB30MM
• SMB30A
WORLD-BEAM® QS30 Series Sensors
P/N 115011 Rev. E www.bannerengineering.com - tel: 763-544-3164 5