Brother BAS-311F-L - Manual (Page 11)

3. INSTALLATION
BAS-311F-0, 311F-L, 326F-0
4
3-1. Table processing diagram
* If using a commercially-available table, process it as shown in the illustration below.
Note
The thickness of the table should be at least 40 mm, and it should be strong enough to bear the weight
and vibration of the sewing machine.
If the distance A between the insides of the legs is less than 740 mm, move the control box installation
position to the left (B=192 mm).
Check that the control box is at least 10 mm away from the leg. If the control box and leg are touching, it
could cause the sewing machine to operate incorrectly.
[Standard]
3-2. Positioning
Determine the position for the sewing machine, and then
lock the casters (1) so that the sewing machine will not
move.
1290S
1161S
(1)