Brother BAS-311F-L - Manual (Page 21)

3. INSTALLATION
BAS-311F-0, 311F-L, 326F-0
14
3-12. Installing the belt cover
1. Loosen the two screws (2) of the upper cover (1).
2. Insert the belt cover (3) in the direction of the arrow,
and then secure it with the two screws (2) and the two
screws (4).
* it is not necessary to remove the belt cover (3)
when tilting back the machine head.
3-13. Installing the foot switch
Insert the connector of the foot switch (2) into the
connector (3) of the control box (1).
3-14. Installing the spool stand
Install the spool stand (1) to the table.
1177S
(3)
(2)
(4)
(1)
1178S
(3)
(1)
(2)
0073Q
(1)