HK Audio CDR 210 F - Manual (Page 54)

Manual
COHEDRA
® & COHEDRA ® Compact
Figure 12: The Sub Array panel
Figure 11: The Rigging panel
3.7 Rigging Panel
The left screen area of the Rigging panel contains
the current COHEDRA
® configuration's mechanical
data. This includes information on the pick-point
as well as the height and weight of the COHEDRA
®
array; that is, the composite of the CDR 208 S,
CDR 208 T, the flight frame and the speaker cords'
individual weights. In addition, it indicates for every
enclosure the model name and the vertical angle to
the neighboring enclosure. Adjust rigging fixtures
to this angle when setting the system up. The
right region of the screen shows a side view of
the current array with a superimposed grid. This
view indicates the angles between two neighboring
enclosures and the pick-point on the flight frame.
Adjust rigging fixtures to this angle and use this
pick-point when setting the system up.
3.8 Sub Array Panel
Use the Sub Array panel to configure horizontal
subwoofer arrays. It can calculate up to ten
subwoofers or subwoofer blocks. If a subwoofer
block consists of several subwoofers, be sure to
stack these.
In box 1, indicate the distances between the
individual subwoofer blocks using a virtual median,
and then indicate desired curvature for the entire
subwoofer array. CAPS uses your input to compute a
virtual subwoofer array that satisfies your curvature
requirements. Box 2 shows for every subwoofer
block the distance between every virtual subwoofer
block and its real-world counterpart, as well as the
delay time that you must select as a result of this.
The lower screen area depicts a top view of the
subwoofer array featuring the real subwoofer blocks
(black) and the virtual subwoofer blocks (blue)