HK Audio CDR 210 F - Manual (Page 80)

Manual
COHEDRA
® & COHEDRA ® Compact
Important note: The BLK.DEF file contains all filter
sets in the sequence recommended by HK AUDIO®
and available at the time of the DFC Software 3.01
release. If you want to reload all of these filters to a
DFC after a master reset, you have another option –
alongside using the Append and Insert buttons– for
creating a filter Selection list:
1. Open the file named BLK.DEF in an editor (for
example, Windows Editor)
2. Store the opened BLK.DEF file under the name
BLK.InI. This new file overwrites the existing BLK.
InI file.
The Selection list now offers the filters contained in
the BLK.DEF file.
Downloading filters to DFCs
Use the Selected Controller, Single Controller, or All
Controllers buttons in the Add Equipment window
to load filters designated for loading in the Selection
list to the DFC(s).
The Selected Controller button sends the filters in
the Selection list that is currently activated in the
user interface's Editing Panel (marked red) to the
DFC. The controller number of this DFC appears in
the display at the right of the Selected Controller
button.
The Single Controller button also sends the filters
in the Selection list to an individual DFC. Select
the desired DFC by entering its controller number
to the display at the right of the Single Controller
button.
The All Controllers button sends the filters in the
Selection list to all connected DFCs.
Once filters have been transferred, close the Add
Equipment window by clicking the Close button.
The Selection list is retained.
Note: The BLK.InI file's write protection must be
deactivated for the Selection list to be retained.
Otherwise, an error message appears because the
Selection list cannot be stored.
Uploading filters to a PC
To copy a filter from a DFC into the DFC Software's
Speakers folder, first select the DFC from which you
want to upload the filter to the PC.
Once you have selected the DFC (it is marked red),
go to the Tools menu and select the option Reload
Equipment, which opens the Reload Equipment
window.
See figure 19. The Reload Equipment window offers
a box called Speaker Type; select the filter that you
want to upload to the PC from the filters contained
in the DFC. Click the Reload Filter button to copy
the filter to the PC. Once it has been uploaded, you
can select and send another filter or quit the Reload
Equipment window via the OK button.
Note: Though the Reload Equipment function sends
files containing filter data (*.BLK), it does not send
files containing filter descriptions (*.HKI). If the
Speakers folder does not contain the file describing
a given filter (*.HKI), you will not be able to view its
properties.
Figure 19: The Reload Equipment window