HK Audio CDR 210 F - Manual (Page 94)

Manual
COHEDRA
® & COHEDRA ® Compact
1 2
3 4
1 2
3 4
1 2
3 4
Figure 4: Mid/High only connected to Ch. 1-4 out
3.3 Mid/High only
Set all Mid/High - Sub switches to Mid/ High
mode. This routes the DFC's HF Out (mid/high
frequency signal) to all four audio inputs. In this
configuration, all power ramps in the rack deliver
the mid/high signal to the mid/high range enclo-
sures. The pin assignments of all of Amp 1 and Amp
2's NL 4 speaker outs are:
pin 1+ = mid/ high+; pin 1- = mid/ high -.
All LEDs light up red.
3.4 Sub only
Set all Mid/High - Sub switches to Sub mode.
This routes the DFC's LF Out (low frequency signal)
to all four audio inputs. In this configuration, all
power ramps in the rack deliver the low frequency
signal to the subwoofers. The pin assignments of all
of Amp 1 and Amp 2's NL 4 speaker outs are: pin 2+
= sub +; pin 2- = sub -.
All LEDs light up green.
Figure 5: Mid/High only connected to Multi out
Figure 6: Sub only connected to Ch. 1-4 out