HK Audio CDR 210 F - Manual (Page 70)

Manual
COHEDRA
® & COHEDRA ® Compact
1.11 Technical Data
Analog Input
Input: 3-pin XLR female
Pin assign: 1 = ground, 2 = signal(+), 3 =signal(-)
Input impedance: 15 k-ohms
Input level (nominal / maximal): 0 dBV / + 24 dBV
Digital Input
Input: 3-pin XLR female
Pin assign: 1 = ground, 2 and 3 = Signal
Input impedance/sensitivity: 250 ohms / 200 mV
Data format / sampling rate:
AES-EBU / 44.1
kHz
Analog output
Output: 3-pin XLR male
Pin assign: 1 = ground, 2 = signal (+), 3 = signal (-)
Output impedance: 47 ohms
Output level (maximal): + 10 dBV
Digital output
Output: 3-pin XLR male
Pin assign: 1 = ground, 2 and 3 = Signal
Output impedance: 110 ohms
Max. output level: 5 V
Data format / sampling rate: AES-EBU / 44.1 kHz
Mains
Mains voltage connector:
3-pole non-heating equipment connector
Mains voltage: 230 V to 253 V
Mains frequency: 50 - 60 Hz
Power consumption: 17 VA
Remotes / Midi
Midi In port: 3-pin XLR female
Pin assign: 1 = ground, 2 = (+), 3 = power circuit
Midi Out port: 3-pin XLR male
Pin assign: 1 = ground, 2 = (+), 3 = power circuit
Remote port: 9-pin D-Sub for connecting a PB4 or
PB5
A/D–D/A Converter
THD, input voltage: -83 dB
Input analog: +21 dBV, 1 kHz
Output analog: +21 dBV
THD, frequency: -87 dB
Input analog: 0 dBV, 50 Hz to 20 kHz
Output analog: 0 dBV
Frequency response: 10 Hz to 20 kHz (± 2 dB)
Input analog: 0dBV
Output analog: 0 dBV
Dynamic range: -128 dB (unweighted; 10 Hz to 20 kHz)
Output: analog, +10 dBV
A/D converter resolution: 24 bits
D/A converter resolution: 20 bits
Ambient temperature range: -10° C to +60° C
Weight: 3 kg (6.6 lbs)
Dimensions (B x H x T): 48.2 cm x 4.4 cm x 22.7 cm
(19" x 1 7/8" x 9")