tekmar 654 Snow Melting Control Installation - Manual (Page 11)

11 of 44 © 2013 654_D - 06/13
Access Levels and Access Level Lock
The control is shipped pre-programmed with common settings.
The control has an “Installer” access level that allows full
access to all settings and a “User” access level that restricts
the number of settings available. The control defaults to the
“User” access level after 12 hours of operation.
Notice: tekmarNet ® system controls include a Global Lock that
locks all connected snow melting controls and thermostats. Set
the tekmarNet
® system control to unlock to allow access level
adjustment on all connected devices.
To change to the “Installer” access level:
In the Toolbox menu, locate Access
Adjust the access level to “Installer” by pressing the up or down
button. This will permit setting changes to the control. •
•
Programmable Settings
Press and hold the Home button for 3 seconds to enter the programming menus. The control returns to the last programming
menu previously used.
Select a Programming Menu -------------------- --------------------
Touch “NEXT” to advance (clockwise in above illustration)
to the next menu.
Touch “BACK” to go backwards (counterclockwise in above
illustration) through the menus.
Touch “ENTER” to enter a menu. •
•
•
Setting Items ------------------------------------ ------------------------------------
Touch or arrow to adjust the setting if required.
Touch “NEXT ITEM” to advance to the next item within the
menu.
Touch “BACK ITEM” to go backwards to the previous item
within the menu.
To return to the parent menu after changing a setting, press
and release the Home button.
To return to the Home screen, press and release the Home
button twice or wait 30 seconds to automatically return to
the Home screen. •
•
•
•
•
Press and
hold for 3
seconds to
access the
programming
menus.
Programming Menus