Tweco 15XC Merlin - Manual (Page 19)

Manual 0-2251 2-5 INTRODUCTION & DESCRIPTION
2.4 OPTIONS AND ACCESSORIES
Power Supply Options
and Accessories
• Remote Control Panel - For machine torch systems, the
low profile operator control panel allows system control
from a remote location with 25 or 50 ft (7.6 or 15.2 m)
cable included.
• Remote Pendant Control - Hand-held remote contactor
control device for machine torch systems.
• Computer Control Cable Kits - For interfacing the
power supply with a computer or auxiliary control
device. Available in 5 or 10 ft (1.5 or 3.0 m) lengths.
• SC-5 Standoff Control - For machine torch systems, the
SC-5 automatically finds height and maintains torch
standoff with a high speed torch lifter motor.
• High Pressure Regulators - Available for air, oxygen,
argon/hydrogen, nitrogen, CO 2, and water.
See Section 6.2, System Components and Accessories for
ordering information.
• Spare Parts Kits - Kits contain replacement front-end
torch parts and tools. Spare parts kits are available for
air cutting with hand or machine torch, multi-gas
cutting with hand or machine torch, or for gouging.
• Leads Extension Packages - Available in 25 ft (7.6 m) or
50 ft (15.2 m) lengths. For extending leads up to a
maximum of 150 ft (45.7 m).
• Metal Shield Cup - For durability in hand cutting.
See Section 6.9, Torch Components and Section 6.10, Torch
Accessories for ordering information.
NOTE
Torch Options
and Accessories
NOTE