Maintenance – Tweco HMC-410 Robotic Interface Kit User Manual
Page 26
Advertising
When ELS is set to ON, any time the wire shorts out to the work (is stuck to the work), the power source
senses this condition and will display an error on the HMC-410, and close the wire stuck relay out of the
HMC-410 Robotic Interface Amphenol. When ELS is set to OFF, this condition is ignored.
Maintenance
Refer to the HMC-410 Owner’s Manual for maintenance of the HMC-410 control box.
Refer to the 170896 Feedhead Technical Instruction Publication for details on maintenance of the
feedhead.
430429-457
2-20
June 13, 2002
Advertising