Tweco 130i Transarc Service Manual - Manual (Page 15)

TRANSARC 130i
Manual 0-5282 1-9 GENERAL INFORMATION83
WARNING
FALLING UNIT can cause injury.
• Use lifting eye to lift unit only, NOT running gear,
gas cylinders, or any other accessories.
• Use equipment of adequate capacity to lift and
support unit.
• If using lift forks to move unit, be sure forks are
long enough to extend beyond opposite side of
unit.
WARNING
MOVING PARTS can cause injury,
• Keep away from moving parts such as fans.
• Keep away from pinch points such as drive rolls.
• Have only qualified persons remove doors,
panels, covers, or guards for maintenance as
necessary.
• Keep hands, hair, loose clothing, and tools away
from moving parts.
• Reinstall doors, panels, covers, or guards when
maintenance is finished and before reconnecting
input power.
WARNING
MAGNETIC FIELDS can affect Implanted
Medical Devices.
• Wearers of Pacemakers and other Implanted
Medical Devices should keep away from servic-
ing areas until consulting their doctor and the
device manufacturer.
WARNING
OVERUSE can cause OVERHEATING.
• Allow cooling period; follow rated duty cycle.
• Reduce current or reduce duty cycle before
starting to weld again.
• Do not block or filter airflow to unit.
WARNING
H.F. RADIATION can cause interference.
• High-frequency (H.F.) can interfere with radio
navigation, safety services, computers, and
communications equipment.
• Have only qualified persons familiar with elec-
tronic equipment install, test, and service H.F.
producing units.
• The user is responsible for having a qualified
electrician promptly correct any interference
problem resulting from the installation.
• If notified by the FCC about interference, stop
using the equipment at once.
• Have the installation regularly checked and
maintained.
• Keep high-frequency source doors and panels
tightly shut, keep spark gaps at correct setting,
and use grounding and shielding to minimize
the possibility of interference.
!
WARNING
READ INSTRUCTIONS.
• Use Testing Booklet (Part No. 150 853) when
servicing this unit.
• Consult the Owner’s Manual for welding safety
precautions.
• Use only genuine replacement parts from the
manufacturer.