04 installing display pcb, Installing display pcb -4, Transarc 130i – Tweco 130i Transarc Service Manual User Manual
Page 72
Advertising
ASSEMBLY PROCEDURES 8-4 Manual -5282
TRANSARC 130i
8.04 Installing Display PCB
1. Plug the ribbon cable into the socket, make sure it is correctly installed with the levers in the locked posi-
tion.
2. Reinstall three screws to install display PCB.
3. Reinstall set screw to install knob.
4. Install the 4 screws.
2
1
3
4
A-11865
Advertising