Tweco 130i Transarc Service Manual - Manual (Page 65)

Manual 0-5282 7-5 DISASSEMBLY PROCEDURE
TRANSARC 130i
7.06 Front Panel assembly Removal
!
Read and follow safety information in Section 6.03 before proceeding with disassembly
1. Remove front panel screws.
2. Remove Positive Output Terminal Bolt.
3. Remove Negative Output Terminal Bolt.
4. Disconnect hose from outlet.
5. Remove 8 pin remote control harness from the control pcb.
1
1
3 2
4
5
A-11859