Unitec POS4000/V2-Wash Select II - Manual (Page 109)

P O S 4 0 0 0
Document Number: POS4007 83
Document Title: POS4000/V2 WSII Operations Manual
6. Press the FEED button until you hear a single beep and release it. The printer will print
the setting for NUMBER OF COL. Continue to press the button until the printer prints
“Number of Col. –42/35”.
7. Press and hold the FEED button until you hear a single beep followed by three quick
beeps.
8. Press the FEED button until you hear a single beep and release it. The printer will print
the setting for FONT SELECT. Continue to press the button until the printer prints “Font
Select -7*9”.
9. To save the configuration, open and close the front cover.