Unitec POS4000/V2-Wash Select II - Manual (Page 132)

P O S 4 0 0 0
Document Number: POS4007 106
Document Title: POS4000/V2 WSII Operations Manual
Appendix F. Application Notes for Using the Reverse Order
Function
Purpose:
To program a POS4000 system where the Register/Pumps are to be programmed with wash 1
as the most expensive.
Requirements:
POS4000 must be loaded with Software version 7.10 or higher. POS4000 system must be set
up with wash 1 as the least expensive in order to allow proper cash purchases at the entry
system under all circumstances.
Setup:
This example shows how to configure a 3 wash system at the register/pumps and at the POS4000.
The setting of a 4 wash system is similar to this example.
The following is an example setup:
Acquire version 7.10 or later software for the POS4000 and install into POS4000.
Program the wash prices as follows:
Program key Regular price Discount 1 price
1 $4.00 $2.00
2 $5.00 $3.00
3 $6.00 $4.00
Discount 2 prices may be programmed as per your requirements.
If you are using group keys (tunnel wash) then use groups 1, 2, and 3, then assign program and
option keys to those groups as per POS4000 manual.
Modify the wash names as required. You may have to alter the price signage at the buttons of a
Hamilton coin box if your wash name assignments have changed.
Modify the wire connections from the coin box if the POS4000 wash assignments have
changed.
From the Ext POS menu-> of the System setup menu change set the following:
POS Type = 1 for Dresser Wayne, 2 for Gilbarco or Verifone. See POS4000 manual for
other Register types. Serial Baud rate may also have to change for other manufacturers.
Compare your system configuration report to the Register Baud rate settings
POS Offset = 0 down (default) (this will be different if you are using group keys)
POS Max Washes = 3 (set to 4 if using 4 washes)
Send Code Age: Disabled (this is enabled if Receipt at pump shows an expiration date of
code)
Reverse order: Enabled