SARGENT 10 Line Cylindrical Lock - Manual

INSTALLATION INSTRUCTIONS FOR
10G70 & 10G71 Electro-Mechanical Bored Locks
for 1-3/4" Doors With ElectroLynx ® Connector System
For installation assistance, contact SARGENT at 800-810-WIRE(9473) or www.sargentlock.com
4409-1 B
RELEASE DATE TEMPLET NO.
Inside/outside of door
Lock edge of door
3/8" dia. Raceway
2-1/8" dia.
5/16" dia.
1 5/16" (Typ.)
2-1/4"
1-1/8 "
1" dia.
13/16" (Typ.)
(2 Places)
Hinge
Pigtail
Raceway harness
Lock
Door with
raceway
ElectroLynx Connector system
Wood door applications
1
"
Ref.
2-9/16
" Ref.
2-15/32" 5/32"
Refer to page 2 for wiring instructions. All connections should be insulated.
2
Power requirement: 12V AC/DC, 0.50 amps or 24V AC/DC, 0.25 amps
BACKSET 2-3/4" 3-3/4" 5"
LOCKSET 10 Line 23-10 Line 25-10 Line
Backset (see chart)
Backset: See chart
16-APR-04
1
Prep directions: Over-drill 1" dia. to a depth of 2-9/16" beyond backset to create pocket for ElectroLynx connectors
Metal door: Prep for #8-32 unc machine screws
Note: Field modifications to doors may alter U.L. listed fire rating.
Provide pocket clearance (approx. 1"x1") for ElectroLynx connector system (8-pin & 4-pin connectors)
10-Line bored-in lock door manufacturer template for solenoid functions (2-3/4", 3-3/4" & 5" backsets)
See electric hinge manufacturers' template for mortise detail
1.
Always make provision(s) to protect electrical wires from abrasion
2. Minimum 3/4" dia. raceway to connect
from upper corner of reinforcement to
hinge
pocket
Electr
o
L
ynx
®
As part of their pr
omise to pr
ovide innovative, fast and
ef
fective, and higher security solutions to their customers,
ASSA ABLOY Gr
oup companies of
fer Electr
oL
ynx, a
universal quick-connect system that simplifies the electrification of the door opening. Electr
oL
ynx
®
is a r
egister
ed trademark of ASSA ABLOY
, Inc.
© SARGENT Manufacturing Company All rights reserved
A6761C