SARGENT GX Series (3 Line) - Manual

INSTALLATION INSTRUCTIONS FOR
GX SERIES LEVER LOCK 3U93 FUNCTION DUMMY TRIM
FOR INSTALLATION ASSISTANCE CALL SARGENT AT 1-800-727-5477 • www.sargentlock.com
Drill
1/8" (3mm) drill bit
Phillips screwdriver
Flat Screwdriver
HERRAMIENTAS UTILZADAS PARA LA
INSTALACION DE SU CERRADURA
Taladro
Broca de 1/8” (3mm)
Desarmador Phillips
Desarmador plano
INSTALLATION INSTRUCTIONS
Mount lock after door is painted
( )
( )
CAUTION: Avoid the use of
solvents, gasoline, detergents and
other substances when cleaning
your lock as these products may
damage its appearance.
PRECAUCION: Evite el uso de
solventes, gasolina, detergentes y
otras sustancias para la limpieza de su
cerradura, ya que dañarán la
apariencia de esta. Limpie únicamente
con un paño húmedo.
DRILL THREE HOLES
1/8" (3 mm) IN DIAMETER
AND 3/8" (8 mm.) IN
DEPTH (APPROX.)
HACER TRES PERFORACIONES
DE 1/8" (3 mm) DE DIAMETRO Y
3/8" (9 mm) DE PROFUNDIDAD
APROXIMADAMENTE.
ANTES DE
RECORTAR LEA
LAS INSTRUCCIONES
TEMPLATE TO INSTALL
DUMMY LEVER LOCK
PLANTILLA PARA INSTALAR
CERRADURA DUMMY MANIJA
CORTE A LO LARGO DE LA LINEA
CUT ALONG THESE LINES
DOBLE AQUI SOBRE EL
CANTO DE LA PUERTA
INSTRUCTIVO DE INSTALACION PARA CERRADURA DUMMY DE MANIJA
Colocar la cerradura una vez pintada la puerta
TOOLS REQUIRED FOR THE LOCK INSTALLATION
A7591A
DOOR TEMPLATE (3) 1/8" (3mm) HOLES
SELECT ACCORDING TO DESIRED
BACKSET
Copyright © 2009, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part
without the express written permission of Sargent Manufacturing Company is prohibited.