SARGENT 7800 Knob Locks - Manual

Parts List Description
1. Inside Lever
2. Springs (2)
3. Lever/Knob Set Screw (1)
Varies by lever design
4. Inside Rose Trim
5. Thrubolt Screws (2) &
Lockwashers (2)(#8 - 32 x 5/8")
6. Spindles (2)
7. Adapter & Plate Assembly
A) Adapter
B) Mounting Plate
C) Washer
D) Retaining Nut
8. Outside Rose Trim
A) Thrubolt Posts (2)
B) Mounting Plate
C) Washer
D) Retaining Nut
9. Outside Lever
10. Cylinder Spring
11. Cylinder Rosette –
Varies in size per function and
cylinder size
12. Cylinder
13. Lockbody
14. Lockbody Screws (2)
(#12 x 1 1/4" WD)
(#12 - 24 x 1/2" MS)
15. Front Plate
16. Front Screws (2)(#8 - 32 x 1/4")
17. Thumb Turn Mounting Plate
18. Mounting Screws (2)
(#6 - 32 x 3/8")
19. Thumb Turn
20. Thumb Turn Screw
(#6 - 32 x 1/4")
TOOLS REQUIRED
Phillips Screwdriver (standard size)
1/8" Allen Wrench
If knobs are used instead of lever
installation is the same.
Inside of Door
Outside
of Door
Triad Lock 3P-8225
Standard 7800/8200 Mortise Lock
1
2
3
6
5
4
7
19
18
20
17
16 14 15
13
6
9
10
11 12
8
25 Function Shown
See template for
hole locations of
other functions.
Triad Only - Parts List
13. Triad Lockbody and Hookbolt
Assembly
14. Lockbody Screws (6)
(WD and MS as above)
15. Triad Front Plate
16. Front Screws (6)(as above)
16
14
15
13
1
INSTALLATION INSTRUCTIONS
7800 Knobs/8200 Levers Mortise Lock & 3P8225 Levers
Triad Lock with Rose Trim - CR, L, & TR Designs
U.S. Patent No. 5,678,870
FOR INSTALLATION ASSISTANCE CALL SARGENT AT 1-800-727-5477 • www.sargentlock.com
Copyright © 2009, Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Sargent Manufacturing Company is prohibited.
A7035E
A 7035E 7800-8200:7800/8200 I.S. 5/20/09 2:10 PM Page 4