Great Plains 3S-4010HDF Operator Manual - Manual (Page 19)

Great Plains Manufacturing, Inc. Preparation and Setup 15
03/28/2012 196-522M
Tractor Electrical Connections
Lighting Harness
Refer to Figure 7
Plug drill electrical lead into tractor seven-pin connector.
If your tractor is not equipped with a seven-pin connector,
contact your dealer for installation.
FigureSpacer:
Electric Clutch Harness
Refer to Figure 8
Mate the connector for the cab clutch control.
FigureSpacer:
Shaft Monitor Harness (Option)
Refer to Figure 9
If the drill is equipped with the optional shaft monitor,
mate the connector for the cab display.
See “Shaft Monitor” on page 83 for ordering informa-
tion.
FigureSpacer:
Figure 7
Lighting Connector
26467
FigureSpacer:
Figure 8
Section Clutch Connector
26469
FigureSpacer:
Figure 9
Shaft Monitor Connector
26468