Great Plains 3S-4010HDF Operator Manual - Manual (Page 33)

Great Plains Manufacturing, Inc. Operating Instructions 29
03/28/2012 196-522M
Loading Small Seeds Box
1. If loading prior to transport, and calibration has not
yet been done, set Seed Rate Handle to 0. At 0, no
seed can leak during transport.
2. Take all necessary materials safety precautions if the
seed is treated.
3. The Small Seeds lid is held closed by two external
rubber latches. Pull them up and to the rear to
release the lid.
4. Load seed evenly into compartments .
5. To reduce wear, remove transmission (driver/driven)
chains for main seed boxes.
If you experience excessive seed shifting in your plant-
ing, consider installing additional optional partitions
(page 87).
FigureSpacer:
Figure 31
Small Seeds Main Box Open
29084
4
4
4