Great Plains 3S-4010HDF Operator Manual - Manual (Page 30)

26 3S-4010HD and 3S-4010HDF Great Plains Manufacturing, Inc.
196-522M 03/28/2012 E
HDF Seeding with Both Compartments
A 3S-4010HDF drill can use the fertilizer compartment
for seed (which is still metered by the main seed box
meters).
1. Clean out both boxes. See “Main Seed Box Clean-
Out” on page 61 and “Fertilizer Box Clean-Out” on
page 61.
Refer to Figure 25
2.
Open the divider door between seed and fertilizer
compartments. To open door, loosen knobs
.
Loosen knobs until bent clips can be turned away
from door
.
3. When all bent clips have been turned, lift vinyl dew
shield (shown in Figure 26) and flip the flap door
backward over fertilizer-tray openings
.
FigureSpacer:
Refer to Figure 26
4.
With seed/fertilizer flap covering fertilizer open-
ings, lower vinyl dew shield to hold flap over fertil-
izer meter cup openings and away from divider.
5. To avoid unnecessary wear, remove all three fertil-
izer transmission chains. See Seed Rate Manual for
details of Fertilizer drive.
FigureSpacer:
Figure 25
Open Seed/Fertilizer Flap
16383
1
1
1
2
3
1
2
2
3
FigureSpacer:
Figure 26
Flap Secured
16380
4 2
2
4