Great Plains 1007NT Operator Manual - Manual (Page 20)

16 1007NT Great Plains Manufacturing, Inc.
150-290M 10/06/2010
Electrical Connection
Refer to Figure 6
(which depicts both European and North American style con-
nectors - if your implement does not have the correct
connector for your tractor, contact your Great Plains dealer)
13. Plug the drill lighting connector into tractor outlet.
14. Coil-up and tie-up excess cable, allowing enough
slack for turns and ridges.
Leveling the Drill
Before making depth control adjustments (page 29):
• the hydraulic system must be free of air (page 73),
• the cylinders must be re-phased (page 15), and;
• the drill must be level front to back and side to side.
Drill level needs to be checked prior to first use, and peri-
odically thereafter. See “Leveling Drill” on page 44.
Figure 6
Lighting Connectors
27172
26467