Great Plains 1007NT Operator Manual - Manual (Page 56)

150-290M 10/06/2010
52 1007NT Great Plains Manufacturing, Inc.
Options
Hitches
One or two hitch options may be specified at initial drill
order. Hitch kits may also be ordered later for field con-
version. If only one option is ordered, it is factory-
installed.
See “Adjust Hitch Height” on page 74.
Coulter Blades
The standard coulter blades on the 1007NT drill are 17in
(43.2cm) Turbo (left) and Fluted (right). Replacement
blades are available as:
Description Option Part Number
PINTLE HITCH OPTION (81) 177-534A
CLEVIS HITCH W/BALL
SWIVEL
(82) 177-537A
Figure 36
Hitch Options
282384
Description Part Number
50 Convolution 5/16 Fluted 820-018C
20 Convolution 5/8 Turbo 820-156C
Figure 37
Coulter Blades
29007