Great Plains 1007NT Operator Manual - Manual (Page 51)

Great Plains Manufacturing, Inc. Maintenance and Lubrication 47
10/06/2010 150-290M
Lubrication
Coulter Arm Pivots
One pivot per row; 15 or 19 total (via grease bank)
Type of Lubrication: Grease
Quantity = Until grease emerges
Ground Drive Wheel Bearings
1 zerk per wheel; 1 or 2 total
Type of Lubrication: Grease
Quantity = Until grease emerges
Fertilizer Shaft Bearings (Option)
1 zerk each bearing, 2 per shaft;
2 total
Type of Lubrication: Grease
Quantity: Until resistance is felt
Note: If Small Seeds is also installed, access these zerks
from below.
50 Multipurpose
spray lube Multipurpose
grease lube
Multipurpose
oil lube
Intervals (service hours) at
which lubrication is required
28448
8
28423
8
16381
15