Great Plains 1007NT Operator Manual - Manual (Page 53)

Great Plains Manufacturing, Inc. Maintenance and Lubrication 49
10/06/2010 150-290M
Felt Barrier Seals (Option)
1 seal at each fertilizer shaft end, 2 total
Type of Lubrication: Oil
Quantity: Soak seal
Note: If Small Seeds is also installed, access these zerks
from below or through the end wall gaps.
Seed Cup Drive Shaft Sprocket
1 sliding sprocket
Type of Lubrication: Oil
Quantity: Coat thoroughly
Move the Seed Rate adjustment handle back and forth to
get oil into the square bore. Perform this with seed box
empty, or handle may be difficult to set to 100.
Drive Chains
See “Chain Routing” beginning on page 61 for locations
of all chains by drill configuration.
Type of Lubrication: Chain Lube
Quantity = Coat thoroughly.
16381
30
12126
50
12227
As
Required