Great Plains 3S-4000HDF Operator Manual - Manual (Page 11)

Great Plains Manufacturing, Inc. Table of Contents Index Important Safety Information 7
2013-06-13 Table of Contents Index 195-067M
Safety Decals
Safety Reflectors and Decals
Your drill comes equipped with all lights, safety reflectors
and decals in place. They were designed to help you
safely operate your drill.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request
corresponding safety decals.
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
818-003C
Slow Moving Vehicle Reflector
Center of rear center section;
1 total
838-266C
Red Reflectors
On rear walkboard face, outside corners, center section;
2 total
18832
27015