Great Plains 3S-4000HDF Operator Manual - Manual (Page 44)

40 3S-4000HD/HDF Table of Contents Index Great Plains Manufacturing, Inc.
195-067M Table of Contents Index 2013-06-13
Divided Capacities
Divider Removal
Refer to Figure 32
a. Remove
5 ⁄
16
inch bolts and flange nuts from
tabs at each end of drill box (2 locations).
b. Remove
5 ⁄
16
inch bolts and nuts from lid-hinge
brackets (3 locations).
c. Loosen but do not remove
1 ⁄
4
inch bolts and nuts
that clamp the lid assembly angle irons to the
plastic dividers .
d. Lift lid assembly out of drill box. Lift dividers out
of drill box. Reinstall standard or offset dividers.
e. Reinstall lid assembly by reversing step d through
step a.
Refer to Figure 33
3. Check that the seed/fertilizer flap at the bottom of the
compartment is closed so seed and fertilizer cannot
pass between compartments.
Flap flips forward to block passage. The flap top
edge is secured to the dividers. Rotate the bent clips
to engage the edge of the flap, and tighten the
knobs.
Capacity Ratio Total Capacity
Seed Fertilizer Seed Fertilizer
None 100% 0% 129.6 bu
4567 l. 0
Standard 60% 40% 77.8 bu
2740 l. 51.8 bu
1827 l.
Offset
to Back 68% 32% 88.1 bu
3106 l. 41.5 bu
1461 l.
Offset
Forward 55% 45% 71.3 bu
2512 l. 58.3 bu
2055 l.
Figure 32
Box Divider Removal
27050
1
3
2
3
2
1
4
5
6
7
8
9
1 2
3
4 5
6
7
8
9
8 9
Figure 33
Seed/Fertilizer Flap Closed
16383