Great Plains 3S-4000HDF Operator Manual - Manual (Page 33)

Great Plains Manufacturing, Inc. Table of Contents Index Operating Instructions 29
2013-06-13 Table of Contents Index 195-067M
Refer to Figure 22
6. Rotate cylinder lock channels over rods on the two
transport lift cylinders and the front box lift cylinder.
Note: Bumpers hold the transport lift cylinder lock
channels in place temporarily. The channels will
remain in position when cylinders settle against
channels.
7. Slowly reverse the Transport Lift circuit lever until all
three lock channels are resting firmly on the rod
ends of the transport lift and box lift cylinders. Set
circuit lever to off.
The drill is now ready for the pre-transport checklist.
See “Transport” on page 30.
Figure 22
Front Box Lift Cylinder Lock
18959