Great Plains 7552 Series VII Operator Manual - Manual (Page 49)

Great Plains Mfg., Inc. Table of Contents ►
Section 3: Replacement Parts
1/19/2006 Series VII 6326-7552 Discovator 550-221M
45
Coulter Gang Assembly
Ref. Kent No. GP Part No. Part Description Comments
1. FC0956R 551-052H Bearing Hanger, RH Coulter Gang
FC0956L 551-055H Bearing Hanger, LH Coulter Gang
2. FC0967 551-091H Gang Bolt, 6 Blade, Coulter
FC0968 551-092H Gang Bolt, 7 Blade, Coulter
FC0968 551-093H Gang Bolt, 8 Blade, Coulter
FC0970 551-094H Gang Bolt, 9 Blade, Coulter
FC0971 551-095H Gang Bolt, 10 Blade, Coulter
FC0972 551-096H Gang Bolt, 11 Blade, Coulter
3. FC1809 20” Turbo Coulter, Discovator
FC0220 Rippled Coulter, 20”
4. FC0932 551-083H Spool, Full 7 13/16” Long
5. FC0931 551-051H 3 3/4” Half Spool
6. FC0481 822-208C Bearing Flange 1 1/2 ID 5 IN SQ
7. FC0743 551-050H 2 1/2” Half Spool
8. PL0266 551-048D 3/4” Plate Washer
9. FC0682 804-063C Washer Machine 2.25 x 1.50 x 10GA
10. 3524 803-301C Nut Hex Slotted, 1 1/2-6
11. 260448 805-115C Cotter Pin, 1/4 x 3
12. 110824 802-091C Hex Bolt, 1/2-13 x 1 1/2 GR5
13. 4108 804-015C Lock Washer, 1/2
14. 3008 803-020C Hex Nut, 1/2
15. AG0050 551-143D Scraper Angle, 44”
AG0051 551-142D Scraper Angle, 52”
AG0052 550-132D Scraper Angle, 60”
AG0063 550-133D Scraper Angle, 68”
16. FL0797 551-057D Scraper 11 3/4”
17. FL0916 551-058D Scraper 7 1/4”
18. 110832 802-128C Hex Bolt, 1/2-13 x 2
8/11/2008