Great Plains 7552 Series VII Operator Manual - Manual (Page 57)

Great Plains Mfg., Inc. Table of Contents ►
Section 3: Replacement Parts
1/19/2006 Series VII 6326-7552 Discovator 550-221M
53
Center Walking Beam, 7333DV (S/N 1227DD+)
Ref. Kent No. GP Part No. Part Description
Comments
1. 580-191D Pivot Spindle, 2 1/2 x 10
2. 816-573C SEAL 2.50IDX3.251DX.47T
FC1072 REP BY 816-573C
3. 822-226C BRG CONE 1.97ID JLM104948
FC1071 REP BY 822-226C
4. 822-225C BRG CUP JLM104910
FC1070 REP BY 822-225C
5. FC2091 560-126H Walking Beam
6. FC0514 800-080C Grease Zerk, 1/4-28 Thread Forming
7. FC0296 822-053C Outer Cup (LM501310)
8. FC0299 822-048C Outer Cone (LM501349)
9. 804-193C Washer, Flat 7/8 Gr.8 2 1/4 OD
10. 804-055C Washer Spindle, 7/8
11. FC0253 805-089C Cotter Pin, 5/32 x 1 1/2
12. 803-029C Slotted Hex Nut, 7/8-14
890-886C GREASE CAP 3.153X1.468X.312
13. DC0166 REPL BY 890-886C
14. FC2083 560-128L Walking Beam Assembly Includes items 1 thru 13
15. 815-226C Hub 8-Bolt Spindle 2.25x16.5 458 Purchased Complete. See pg 3-17
16. 110564 802-279C Hex Bolt, 5/16 x 4
17. 4105 804-009C Lock Washer, 5/16
18. 3005 803-008C Hex Nut, 5/16
19. PW0090 814-222C Wheel, 15 x 8, 8-bolt, White
20. FC1767 814-226C Tire, 11L x 15, Load F
21. FC2279 814-235C Tire/Wheel 11Lx15 Load F, White Includes items 19 & 20
22. 803-219C Nut Lug, 5/8-18x90 Deg
8/11/2008