Great Plains 7552 Series VII Operator Manual - Manual (Page 69)

Great Plains Mfg., Inc. Table of Contents ►
Section 3: Replacement Parts
1/19/2006 Series VII 6326-7552 Discovator 550-221M
65
6-Bolt Hub & Spindle Assembly
Ref. Kent No. GP Part No. Part Description
Comments
1. FC1203 550-014D Spindle, 2 x 14 (Q888)
FC1333 550-017D Spindle, 2 x 13 (Q888)
2. FC0372 816-398C Seal, (CR16286)
3. FC0250 816-396C Wear Sleeve, (CR081071)
4. FC0373 822-198C Inner Cone, (JL69349)
5. FC0371 822-197C Inner Cup, (JL69310)
6. 800-130C Grease Zerk, 1/8-27 NPT Straight
7. FC0370 815-142C Hub Casting, 6-Bolt w/cups Q888
8. FC0246 822-020C Outer Cup, (LM67010)
9. FC0248 822-021C Outer Cone, (LM67048)
10. FC0251 804-055C Washer, Spindle 7/8
11. FC0253 805-089C Cotter Pin, 5/32 x 1 1/2
12. FC0252 803-029C Slotted Hex Nut, 7/8-14
13. FC0254 890-781C Dust Cap
14. 120820 802-632C Wheel Bolt, 1/2 x 1 1/4
15. 815-216C Hub 6-Bolt Spindle 2x14 888 Purchased Complete
FC1206 550-005S Replaced by 815-216C Includes items 1 thru 14
815-214C Hub 6-Bolt Spindle 2x13 888 Purchased Complete
FC1334 550-007S Replaced by 815-214C Includes items 1 thru 14
815-216C &
815-214C
Used on standard
hub wing walking
tandems.
Legend: = 1st revision; = 2nd revision, = 3rd revision; use up existing stock;
⊗ not interchangeable; ⊗
Revision 2 is not interchangeable with 1