57 wing walking beam assembly, Great plains mfg., inc – Great Plains 7552 Series VII Operator Manual User Manual
Page 61
1/19/2006
Series VII 6326-7552 Discovator 550-221M
57
Wing Walking Beam Assembly
Ref. Kent No. GP Part No. Part Description
Comments
1.
FC0347
550-015D
Pivot Spindle, 2 x 8 1/16 (Q888)
2.
FC0372 816-398C Seal
(CR16286)
3.
FC0250
816-396C
Wear Sleeve (CR081071)
4.
FC0373
822-198C
Inner Cone (JL69349)
5.
FC0371
822-197C
Inner Cup (JL69310)
6.
FC1329 550-006H Walking
Beam
7.
FC0514
800-080C
Grease Zerk, 1/4-28 Thread Forming
8.
FC0246
822-020C
Outer Cup (LM67010)
9.
FC0248
822-021C
Outer Cone (LM67048)
10.
FC0251
804-055C
Washer, Spindle 7/8
11.
FC0253
805-089C
Cotter Pin, 5/32 x 1 1/2
12.
FC0252
803-029C
Slotted Hex Nut, 7/8-14
13.
FC0254 890-781C Dust
Cap
14.
815-216C
Hub 6-Bolt Spindle 2x14 888
(Standard) Purchased Complete
FC1206 550-005S
Replaced by 815-216C
Front Side Tandem. See pg. 64
815-195C
Hub 6-Bolt Spindle 2x14.5 890
(Heavy Opt.) Purchased Complete
570-206S
Replaced by 815-195C
Front Side Tandem. See pg. 62
15.
815-214C
Hub 6-Bolt Spindle 2x13 888
(Standard) Purchased Complete
FC1334 550-007S
Replaced by 815-214C
Back Side Tandem. See pg. 64
815-221C
Hub 6-Bolt Spindle 2x13.5 890
(Heavy Opt.) Purchased Complete
570-205S
Replaced by 815-221C
Back Side Tandem. See pg. 62
16.
210548
805-324C
Clevis Pin, 5/16 x 3 w/cotter
17.
260216
805-363C
Cotter Pin, 1/8 x 1
18.
FC1332
560-079L
Walking Beam Assembly
(Standard option) Items 1 thru 17
FC2200
570-207L
Walking Beam Assembly, Heavy Hub
(Heavy Hub option) Items 1 thru 17
19.
FC0360
814-220C
Wheel, 15 x 6, 6-bolt
20.
FC1762
814-011C
Tire, 9.5L x 15, 8 ply
21.
FC2274
814-230C
Tire/Wheel 9.5Lx15 8-Ply White
Includes items 19 & 20
22.
120820
802-632C
Wheel Bolt, 1/2-20 x 1 1/4 Gr 5
(Standard option)
803-017C
Lug Nut, 1/2 x 90 Deg.
(Heavy Hub option)
Legend: = 1st revision; = 2nd revision, = 3rd revision; use up existing stock;
⊗ not interchangeable; ⊗
Revision 2 is not interchangeable with 1