Great Plains 7552 Series VII Operator Manual - Manual (Page 55)

Great Plains Mfg., Inc. Table of Contents ►
Section 3: Replacement Parts
1/19/2006 Series VII 6326-7552 Discovator 550-221M
51
Center Walking Beam, 6500DV (S/N 1329DD+)
Ref. Kent No. GP Part No. Part Description
Comments
1. 550-259H Walking Beam Spindle
2. 550-258H Walking Beam
3. 550-244D Floating Sleeve
4. 804-063C Machine Washer, 2.25 x 1.5 x 10Ga
5. 803-239C Slotted Hex Nut, 1 1/2-12
6. 805-115C Cotter Pin, 1/4 x 3
7. 816-573C SEAL 2.50IDX3.251DX.47T
FC1072 REP BY 816-573C
8. 822-226C BRG CONE 1.97ID JLM104948
FC1071 REP BY 822-226C
9. 550-261L Walking Beam Assembly Includes Items 1 thru 8
10. 822-225C BRG CUP JLM104910
FC1070 REP BY 822-225C
11. FC0514 800-080C Grease Zerk, 1/4-28 Thread Forming
12. 815-277C Hub 8-Bolt Spindle 2.25 X 13.25 458 Purchased Complete
See pg. 3-19 for parts
13. 110564 802-279C Hex Bolt, 5/16 x 4
14. 4105 804-009C Lock Washer, 5/16
15. 3005 803-008C Hex Nut, 5/16
16. PW0090 814-222C Wheel, 15 x 8, 8-bolt, White
17. FC1767 814-226C Tire, 11L x 15, Load F
18. FC2279 814-235C Tire/Wheel 11Lx15 Load F White Includes items 19 & 20
19. 803-219C Nut Lug, 5/8-18x90 Deg
8/11/2008
Legend: = 1st revision; = 2nd revision, = 3rd revision; use up existing stock;
⊗ not interchangeable; ⊗
Revision 2 is not interchangeable with 1