Great Plains NTA3010 Predelivery Manual - Manual (Page 21)

11/06/2008 160-220M
Great Plains Manufacturing, Inc. Setup 19
Setup
Hitch Cart to Implement
Hitch link details are slightly different for ADC2350 and
ADC2220 carts.
Hitching ADC2350 Cart
Refer to Figure 18,
which, for clarity, depicts the air cart without the rear hopper
1. Use a line (not shown), from the cart tank hoops, to
tie the cart links
up so that the ball swivels are
at about the same height as the lug holes .
2. Drive the roll pins out of the lug pins and
remove the lug pins.
3. Have a tractor slowly guide the cart backwards until
the link arm ball swivels
are within two feet (60cm)
of the lug holes , and aligned with them side-to-
side.
4. Set the tractor parking brake. Remove the pins
restraining the telescoping arms
. Do not remove
the stop bolts .
5. Re-insert the lug pins and secure with
roll pins .
6. Release the tractor brakes and back up the cart until
the telescoping arm pins
can be re-inserted and
secured with cotter pins .
Hitching ADC2220 Cart
Refer to Figure 19
7. Use a line (not shown), from the cart walkboard, to
tie the cart links
up so that the ball swivels are
at about the same height as the lug holes .
8. Drive the roll pins out of the lug pins and
remove the lug pins.
9. Slowly back cart toward center of implement. When
ball swivels
are aligned with implement lugs ,
re-insert lug pins . Secure with roll pins .
!
WARNING
You may be severely injured or killed by being crushed
between the tractor and cart or between the cart and imple-
ment. Do not stand or place any part of your body between the
cart and implement while hooking up.
2
Figure 18
Hitching ADC2350 Cart to Drill
26448
1
93
85
92
86
17
53
3
85 1
2
53 17
1
2
92
86
3
17
53
92
93
2
Figure 19
Hitching ADC2220 Cart to Drill
16430
1
17
53
73
85 1
2
53 17
1 2
17 53