Great Plains NTA3010 Predelivery Manual - Manual (Page 3)

11/06/2008 160-220M
Great Plains Manufacturing, Inc. 1
Important Safety Information
Read “Important Safety Information” in the Operator
Manual for both air cart and air drill.
Look for Safety Symbol
The SAFETY ALERT SYMBOL indicates there is a
potential hazard to personal safety involved and extra
safety precaution must be taken. When you see this
symbol, be alert and carefully read the message that fol-
lows it. In addition to design and configuration of equip-
ment, hazard control and accident prevention are
dependent upon the awareness, concern, prudence and
proper training of personnel involved in the operation,
transport, maintenance and storage of equipment.
Be Aware of Signal Words
Signal words designate a degree or level of hazard seri-
ousness.
DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
This signal word is limited to the most extreme situations,
typically for machine components that, for functional pur-
poses, cannot be guarded.
WARNING indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury, and includes hazards that are exposed when
guards are removed. It may also be used to alert against
unsafe practices.
CAUTION indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury. It is also used to alert against unsafe practices.
Review Operating Information
▲ Review Operator Manuals included with drill and cart.
▲ Read and understand “Safety Decals” in Operator Manu-
als.
▲ Read all instructions noted on the decals.
!
! DANGER
! WARNING
! CAUTION