Console installation – Great Plains NP4000B Operator Manual User Manual
Page 183
Great Plains Manufacturing, Inc.
Appendix B - Initial and Option Setup
179
2014-05-14
417-199M
Console Installation
Refer to Figure 99
The applicator’s optional Raven SCS 450 flow controller
system includes one or two consoles
that need to be
mounted in the cab of the tractor to be used with the
applicator.
Each monitor includes cables for power
, speed
sensor
and sensor harness
. Installation
instructions are found in the included 016-0159-831
Raven SCS 450 Installation, Operation and Service
manual manual.
Power color code is:
+ positive: red
- negative: black
The included bracket
requires customer-supplied
fasteners.
Before first field use of the SCS 450, it must be
programmed with data specifying the system
configuration, consisting of various “CAL” numbers and
user elected “RATE” numbers. See the Raven SCS 450
manual for display interpretation, and see the manual of
or the Calibration Card for the keystroke sequence for
setting each of these values.
See “Meter / Variable Rate Setup (Option)” on page 44.
This data is retained as long as the SCS 450 remains
connected to battery power. If power is removed for
electrical work, long term tractor parking or welding, the
data is lost and must be re-entered.
Transport and Field Safety Risk:
Mount the module so it is easy to monitor during application,
but does not interfere with safe operation of the tractor in the
field or on public roads.
Figure 99
SCS 450 Tractor Components
27271
1
3
4
2
5
1
2
3
4
5