John Deere stx38 - Manual (Page 246)

6 - 14
3/21/97
THEORY OF OPERATION HYDROSTATIC POWER TRAIN
M58271
W
X
Y
NOTE: Brake pedal has approximately 127 mm (5 in.)
of travel.
1. The first segment of travel (W) is taking-up freeplay
in the brake and return-to-neutral linkages.
2. The next segment of travel (X) is returning the shift
linkage to neutral and engaging the brake.
IMPORTANT: Full brake engagement (drive wheels
stop turning) must not occur until shift linkage
has returned to neutral completely. If this is not
the case, see Tests and Adjustments
procedures later in this section.
3. The last segment of travel (Y) is locking and
unlocking the brake linkage into park.