John Deere stx38 - Manual (Page 277)

3/21/97
6 - 45
HYDROSTATIC POWER TRAIN REPAIR
K-50 Short Axle Side
K-55 Short Axle Side
8. Repeat thrust washer procedures for short axle
side.
Install Filter, Magnet, and Transport (Free-
Wheeling) Assembly—
1. Carefully install new relief valve assemblies (B) to
specification into center block bores (A).
Specification:
Transport relief valve assemblies
. . . . . . . . . . . . . . . approximately 13 mm (0.51 in.)
K-55 Version Shown
2. Install new filter (C).
3. Install bypass valve push pin guides (D), springs
(E), and push pins (F).
4. Install new o-ring (J) on actuating pin and install in
lower case half bore (G).
5. Fasten actuating bracket (I) with e-ring (H).
6. Be sure assembly is pushed all-the-way out before
assembling transaxle case halves.
7. Install clean or new magnet assembly (K).
H
M58229
H
M58347
M58211
B
A
M58352
C
D
E
F
M58239
J
G
I
H
M55843
I
H
K
6