Casio XJ-350 - Manual (Page 101)

User Maintenance
101
User Maintenance This section explains user maintenance procedures, including lamp replacement and projector
cleaning.
Always turn off the projector before cleaning it.
Cleaning the Projector Exterior
Wipe the exterior of the projector with a soft cloth that has been moistened in a weak
solution of water and a mild neutral detergent. Be sure to wring all excess moisture from the
cloth before wiping.
Never use benzene, alcohol, thinner, or any other volatile agent for cleaning.
Cleaning the Lens
Carefully wipe the lens with a lens cloth or lens cleaning paper, which you should be able to
purchase from a nearby eye wear or camera shop. When cleaning the lens, be very careful
to avoid scratching it.
Use the following procedure to reattach the lens cover if it should accidentally become
detached from the projector.
1.
Positioning the lens cover so it is at an angle that is more than 90
degrees relative to the lens, insert left hinge
3 of the lens cover into
the slot on the left 1 .
Cleaning the Projector
Reattaching the Lens Cover
2 1
4 3