Casio XJ-350 - Manual (Page 53)

53
Projection Operations
z The allowable ranges for manual keystone correction are –30 to +30 degrees vertically,
and –8 to +8 degrees horizontally.
z Performing horizontal keystone correction and then vertical keystone correction can cause
the horizontal keystone correction value to change. This occurs when vertical keystone
correction narrows the allowable manual horizontal keystone correction range, causing the
horizontal keystone correction value to be outside the correction range.
If this happens, rearrange the projector and screen so the lens is pointing straighter at
the screen, and then perform manual keystone correction or auto keystone correction
again.
You can use the remote controller keys to adjust the volume level of the audio that is output
from the projector’s speaker.
To adjust the volume level
1.
On the remote controller, press the [VOL +] or [VOL –] key.
z This causes the [Volume] screen to appear on the projected image.
2.
Press the [VOL +] key or the [
X] key to increase the volume, or the
[VOL –] or [
W] key to lower the volume.
3.
After the setting is the way you want, press the [ESC] key.
z This causes the [Volume] screen to disappear.
Adjusting the Volume Level (VOL +/–)