Casio XJ-350 - Manual (Page 36)

Getting Ready
36
You can use the projector to project an image from a video deck, TV, video camera, or other
video device. You can also output audio from the video device through the projector’s speaker.
z Always turn off the projector and the video device before connecting them.
z You can use the bundled video cable to connect to a pin jack (RCA) type VIDEO output
terminal. When connecting a video camera or other video device with a special video
output terminal, use the special cable that comes with the video device. For details, see
the documentation that comes with the video device.
z Note that the projector is equipped with separate circuits for the VIDEO input terminal and
S-VIDEO input terminal. Make sure you connect the video device to the correct terminal.
The projector lets you switch the input source between RGB (or Component), VIDEO, and
S-VIDEO whenever you want.
Connecting to a Standard Video Device
Projector Video device
Commercially available audio cable
Commercially available S-video cable
Bundled video cable
VIDEO input terminal
S-VIDEO input terminal
AUDIO input terminal
To S-VIDEO output terminal
To VIDEO output terminal
To AUDIO output terminal