Casio XJ-350 - Manual (Page 110)

Troubleshooting
110
Troubleshooting This section explains how to interpret the projector’s indicators, and what you need to do
when you experience problems with projector operation.
The status of the indicators let you know the current operational status of the projector. This
section provides details about indicators, and about the error alert tones.
Normal Operation Indicators
z “POWER” in the following table stands for the “POWER/STANDBY” indicator.
Indicators and Alert Tones
When this indicator Is this It means this See page
POWER: Amber steady You have just plugged the AC cord into
a power outlet. Wait until the projector
enters the standby state (see below)
before trying to turn on power.
38 TEMP: Amber steady
LAMP: Amber steady
POWER: Amber steady
Standby state: The AC power cord is
plugged in and the projector is in
standby.
38
POWER: Green flashing
Projector is warming up after being
turned on.
POWER: Green steady Projector is on and standing by for use.
POWER: Amber flashing
Projector is cooling down after being
turned off.
41
LAMP: Green steady Projector is in the low noise mode. 90
POWER/STANDBY indicator
TEMP indicator
LAMP indicator