Casio XJ-350 - Manual (Page 54)

Projection Operations
54
You can use the remote controller’s zoom keys to enlarge a specific part of the projected
image up to four times its original size.
To enlarge part of the projected image
1.
On the remote controller, press the [D-ZOOM +] or [D-ZOOM –] key.
z This causes a cross cursor to appear on the projected image.
2.
Use the remote controller’s cursor keys to move the cross cursor to the
part of the image that you want in the center of the enlarged image.
Enlarging the Projected Image (D-ZOOM +/–)