Casio XJ-350 - Manual (Page 6)

Safety Precautions
6
●Projector cabinet
Never open the projector’s
cabinet. Doing so creates the risk
of electric shock.
●Cleaning
Before cleaning the projector, be
sure to turn it off and unplug it
from the power outlet. Failure to
do so creates the risk of electric
shock.
●Exhaust vents
The exhaust vents become very hot
while the projector is running. Never
touch them. Doing so creates the risk
of burn injury. The areas near the
exhaust vents also become quite hot.
Never locate objects made of plastic or
other heat-sensitive materials near or
under the projector. Doing so creates
the risk of deformation and discoloration
of the object.
●Lens cover
Be sure to open the lens cover before
turning on the projector. Never close the
lens cover while the projector is in use.
●Location
Never locate the projector in any of the
following types of locations. Doing so
creates the risk of fire and electric
shock.
• Near an area subject to strong
vibration
• An area subject to large
amounts of moisture or dust
• In a kitchen or other area
exposed to oil smoke
• Near a heater, on a heated
carpet, or in an area exposed
to direct sunlight
• An area subject to temperature
extremes (Operating
temperature range is 5°C to
35°C (41 to 95 °F)).
●Heavy objects
Never place heavy objects on the
projector or climb on top of the
projector. Doing so creates the risk of
fire and electric shock.
●Water
Never locate the projector in a
bathroom or anywhere else there is the
chance that it will be splashed with
water.
●Unstable location
Never place the projector on an
unstable surface or on a high
shelf. Doing so can cause it to
fall, creating the risk of personal
injury.
●Using the projector on a base
with casters
Whenever using the projector on a base
that has casters, make sure that you
lock the casters when not moving the
base.
●Lightening
During a lightening storm, do not touch
the plug of the projector’s power cord.