Casio XJ-350 - Manual (Page 43)

Projection Operations
43
Projection Operations This section explains operations that are related to projection of an image.
This section explains the basic steps for projecting an image.
Basic Flow
Projecting onto a Screen
Prepar
ing the Projector
Star
ting
Projection
Set up the projector and point it at the screen.
“Setting Up the Projector” (page 28)
Connect the computer or video device to the projector ( 34 to 37).
Turn on the projector and the connected computer or video device.
Press the [ ] (power) key to turn on the projector.
“Turning On the Projector” (page 38)
Perform fine adjustment of the projection position and angle.
“Adjusting the Projector Elevation Angle” (page 32)
Select the input source.
“Manually Selecting the Input Source” (page 45)
Adjust the projected image size and focus the image.
“Zoom and Focus” (page 47)
Start projection (presentation, video, etc.)
• Perform the required operation on the input source computer or video equipment.
• Use the projector’s various functions to adjust the projected image as required.