Acronis Access Advanced - Administrator's Guide - Manual (Page 126)

126 Copyright © Acronis International GmbH, 2002-2014
In the Server Info box, enter the DNS name or IP address of your Acronis Access Gateway server. The
Port number is usually 443, unless you've configured Acronis Access to run on a non-standard port.
All communication between Acronis Access clients and the Gateway servers occurs on port 443 by
default. Click the 'Check' button to save this change.
5.12.3.3 Allowing access to multiple Acronis Access Gateway servers
If you have more than one Acronis Access Gateway server on your network, you will have to allow
additional server addresses in the Good Control console. If you do not so this, the Access Mobile
Client will only be able to connect to the single server you configured in the previous step.
To permit access to additional Gateway servers, select the Client Connections item in the lefthand
menu in the Good Control console.