Acronis Access Advanced - Administrator's Guide - Manual (Page 136)

136 Copyright © Acronis International GmbH, 2002-2014
Within this new AppConnect App Configuration, enter the following information:
Name – This can be any name you’d like to assign to this configuration. You may create more than
one configuration and assign those configurations to different MobileIron labels.
Description – This can be any description you like.
Application – This must be set to the Bundle Identifier of the Access Mobile Client app, which is:
com.grouplogic.mobilecho
AppTunnel – The AppTunnel settings are optional and only needed if you are using AppTunnel to
provide access to your Acronis Access Gateway server(s). URL Wildcard = the DNS address of your
Gateway server(s) or your domain as a whole. Acronis Accesss use port 443 by default. Sentry = the
DNS address of your MobileIron Sentry server.
App-specific Configurations – This section allows you to specify values that will be used to
auto-complete the Acronis Access enrollment form for the users who this configuration applies to,
based on MobileIron label. The following Keys can be added:

enrollmentServerName – This key field is required. The value of this key should be set to the
DNS address of the Acronis Access Server that the user should enroll with.

enrollmentPIN – This key is optional. If your Acronis Access Server requires a PIN number for
client enrollment, you can auto-complete the PIN number field in the Acronis Access
enrollment form with this value. It is typical that the PIN requirement on the Acronis Access
Server is disabled, since AppConnect can serve as the 2nd factor of authentication before a
user has access, rather than the one-time-use PIN number. This PIN requirement is
configured on the Settings page (p. 53) of the Acronis Access web console.