Acronis Access Advanced - Administrator's Guide - Manual (Page 37)

37 Copyright © Acronis International GmbH, 2002-2014
Displays a table of all users currently active in this Gateway Server.

User - Shows the user's Active Directory (full) name.

Location - Shows the IP address of the device.

Device - Shows the name given to the device by the user.

Model - Shows the type/model of the device.

OS - Shows the operating system of the device.

Client Version - Shows the version of the Acronis Access app installed on the device.

Policy - Shows the policy for the account used by the device.

Idle Time - Shows the time the user has spent connected to the gateway.
1.4.3 Editing Gateway Servers
Access Restrictions
You can use the default access restrictions set in the Policies (p. 8) section or you can set custom
access restrictions for each Gateway Server.
Setting custom access restrictions for this Gateway Server
1. Press the Down arrow next to the Details button.
2. Select Access Restrictions.
3. Open the Use Custom settings tab.
4. Select the specific access restrictions you want for this Gateway Server.
5. Press Apply.
General Settings
Display Name - Sets the display name of the Gateway Server.
Address for administration - Sets the address on which the Gateway Server is reachable by the
Acronis Access Server.
Address for client connections - Sets the address on which mobile clients will connect to the
Gateway Server.