Acronis Access Advanced - Administrator's Guide - Manual (Page 95)

95 Copyright © Acronis International GmbH, 2002-2014

The Client Enrollment Address should be the external address of your load balancer (i.e.
mylb.company.com).

Select your Color Scheme.

Select the language for the Audit Log messages.
c. Under the SMTP tab:

Enter the DNS name or IP address of your SMTP server

Enter the port of your SMTP server.

If you do not use certificates for your SMTP server, unmark Use secure connection?.

Enter the name which will appear in the "From" line in emails sent by the server.

Enter the address which will send the emails sent by the server.

If you use username/password authentication for your SMTP server, mark Use SMTP
authentication? and enter your credentials.

Press Save.
d. Under the LDAP tab:

Mark Enable LDAP.

Enter the DNS name or IP address of your LDAP server.

Enter the port of your LDAP server.

If you use a certificate for connections with your LDAP server, mark Use Secure LDAP
Connection.

Enter your LDAP credentials, with the domain. (e.g. acronis\hristo).

Enter your LDAP search base.

Enter the desired domain(s) for LDAP authentication. (i.e.to enable LDAP authentication
for an account with the email [email protected], you would enter glilabs.com)

Press Save.
e. Under the Local Gateway tab:
Note: If you're installing both a Gateway Server and the Acronis Access Server on the same machine,
the Gateway Server will automatically be detected and administered by the Acronis Access Server.

Set a DNS name or IP address for the local Gateway Server. This is an internal address
behind the load balancer (i.e. 10.27.81.10).

Press Save.
f. Under the File Repository tab:

The File Repository Address should be the internal address of the server you have
created for the file repository role (i.e. 10.27.81.2).
3. Once you've completed the Setup Wizard, press Finish and navigate to Mobile Access ->
Gateway Servers.
4. It is time to register your second Gateway server:
a. Enter a Display name for the second Gateway.
b. The Address For Administration should be an internal address behind the load balancer (i.e.
10.27.81.11).
c. Enter the Administration Key. You can obtain it by going to the machine on which the
Gateway you are adding is installed, navigating to https://mygateway:443 (i.e.
https://10.27.81.10 or https://10.27.81.11) and the key will be displayed there. For more
information visit the Registering new Gateway Servers (p. 34) article.
d. Press Save.